SAE J517

R6

Applicable Specs:

DIN EN 853 1TE
SAE 100R6
DIN 20021 1TE
TS 6388 EN 854 TIP 1TE
ISO 4079-1TE
ISO 1307

Applications:

Internal hose:

Synthetic rubber, extruded whole without joints, of uniform thickness

Reinforcement:

1 layer of textile braid

Covering:

Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions

Fittings:

Ferrule: No-skive Type PUSH-ON-R6/1TE, Insert: PUSH-ON-R6/1TE (X: Can choose), Certificate: MSHA & BV & GOST & MA & DEKRA & IATF 16949 & DAKKS & SGS Approved

Working Pressure:

12–35 Bar / 174–507 PSI

Impulse times:

Temperature:

-40 °C to +100 °C (intermittent 120 °C), -40 °C to +70 °C for water based fluids, 0 °C to +70 °C hot air, Prolonged operation at extreme temperatures will reduce hoses life

Media:

Hydraulic fluids petroleum based (mineral oils), glicol-water based, water, lubricants


Part Number	Hose Size			I.D.	R.O.D.	O.D.	Operating Pressure		Burst Pressure		Bend Radius	Weight	Length Per PCS	Ferrule
I.D.	Dash Size	mm	inch	mm	mm	mm	bar	psi	bar	psi	mm	kgs/m	meter	Code
SMJ 311106-05	-03	4.8	3/16"	4.4-5.2	-	10.0-11.6	35	507.5	140	2030	50	0.100	50/100	PUSH-ON-R6/1TE-03
SMJ 311106-06	-04	6.4	1/4"	5.9-6.9	-	11.6-13.2	28	406	112	1624	65	0.110	50/100	PUSH-ON-R6/1TE-04
SMJ 311106-08	-05	8.0	5/16"	7.4-8.4	-	13.1-14.7	28	406	112	1624	75	0.130	50/100	PUSH-ON-R6/1TE-05
SMJ 311106-10	-06	9.5	3/8"	9.0-10.0	-	14.7-16.3	28	406	112	1624	75	0.160	50/100	PUSH-ON-R6/1TE-06
SMJ 311106-12	-08	12.7	1/2"	12.1-13.3	-	17.7-19.7	28	406	112	1624	100	0.220	50/100	PUSH-ON-R6/1TE-08
SMJ 311106-16	-10	16.0	5/8"	15.3-16.5	-	21.9-23.9	24	348	96	1392	125	0.270	50/100	PUSH-ON-R6/1TE-10
SMJ 311106-19	-12	19.0	3/4"	18.2-19.8	-	25.4-27.8	21	304.5	84	1218	150	0.330	50/100	PUSH-ON-R6/1TE-12
SMJ 311106-25	-16	25.4	1"	24.6-26.2	-	33.4	12.0	174	48	696	155.0	0.5	50/100	PUSH-ON-R6/1TE-16